Released on May 08, 2015.



Impulse response library based on:
  • "V3 Mix" sampling methodology and feature set
  • neutral solid state power amp
  • Boogafunk Thiele 1x12 cabinet
  • vintage 8-ohm Electro Voice SRO-12


Wave Audio (.wav)
Wave audio format IR's (.wav) are compatible with convolution reverb type loaders in recording software and outboard hardware units and are provided in:
  • 24 bit resolution
  • 44.1, 48, 88.2, and 96 kHz sample rates
  • mono and stereo (dual mono)
  • minimum phase transformed and non-minimum phase transformed
  • 200 and 500 ms decay tail lengths
For added convenience, .wav files appropriate for conversion or submission to the following platforms have been separated out and designated within the library structure:
  • Atomic Amplifire
  • Fractal Audio Systems hardware/software
  • Kemper Profiling Amp hardware
  • Two Notes hardware


  57 • based on Shure SM57 dynamic microphone
  70 • based on a Microtech Gefell UMT70S condenser microphone
121 • based on Royer R121 ribbon microphone
414 • based on a vintage AKG C414B-ULS condenser microphone

Additional auxiliary captures based on an AEA R92 ribbon microphone and vintage Neumann KM84 condenser microphone



  • Prism Orpheus
Microphone Amplification:
  • Classic API VP28 with dual vintage Huntington era API 2520 opamps


  • Based on a vintage 8-ohm Electro Voice SRO-12.


  • 57 = 11 captures
  • 70 = 11 captures
  • 121 = 1 capture
  • 414 = 1 capture
  • Auxiliary = 6 captures
  • "Mix" = 1 mix
  • Precise Modern = 11 mixes
  • Precise Vintage = 11 mixes
  • Raw Modern = 11 mixes
  • Raw Vintage = 11 mixes
This makes the total amount of captures:
30 mic files + 45 mix files = 75 unique IR's


Please read the file format inclusions section at the top of this page carefully - this library only contains .wav format files. As per Section 9. Terms of Sale of the Terms of Use Agreement, there are NO REFUNDS ON DIGITAL GOODS, which includes this library.

Included File 01:


Copyright © OwnHammer, LLC. All rights reserved.

Terms of Use   |   Privacy Policy   |   Newsletter Subscribe

Third Party Reference Disclaimer:

Any and all third party companies and products listed or otherwise mentioned on this site may be trademarks of their respective owners and are in no way affiliated or associated with OwnHammer, LLC. Product names are referenced solely for the purpose of identifying the hardware used in the equipment chain for impulse response capture or are examples of companion products. Use of these names does not imply any cooperation or endorsement.